MCC under mga v8 X64

[Vincent Coen]

Hello All!

For some months when ever I try and run MCC I get errors as in :

. - ..
sudo mcc
Too late to run INIT block at
/usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
Ignore the following Glib::Object::Introspection & Gtk3 warnings
Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
line 539.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
"cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at
/usr/libexec/drakconf line 833.
Oops, secure memory pool already initialized
Oops, secure memory pool already initialized
Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
want Webferent signal

(WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
'WebKitWebPran X Window System error.
This probably reflects a bug in the program.
The error was 'BadValue (integer parameter out of range for operation)'.
(Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error()
function.)
Oops, secure memory pool already initialized
Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
want Webferent signal
. - ..

I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but no -
it recreated it but with same results.

This error is stopping me checking or adding software.

Can any one help me please ?


Vincent

[David W. Hodgins]

On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <***@gmail.com> wrote:

> Hello All!
>
> For some months when ever I try and run MCC I get errors as in :
>
> . - ..
> sudo mcc
> Too late to run INIT block at
> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
> Ignore the following Glib::Object::Introspection & Gtk3 warnings
> Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
> line 539.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> "cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at
> /usr/libexec/drakconf line 833.
> Oops, secure memory pool already initialized
> Oops, secure memory pool already initialized
> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
> want Webferent signal

Up to this point, the messages are normal.

> (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
> 'WebKitWebPran X Window System error.
> This probably reflects a bug in the program.
> The error was 'BadValue (integer parameter out of range for operation)'.
> (Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
> (Note to programmers: normally, X errors are reported asynchronously;
> that is, you will receive the error a while after causing it.
> To debug your program, run it with the GDK_SYNCHRONIZE environment
> variable to change this behavior. You can then get a meaningful
> backtrace from your debugger if you break on the gdk_x_error()
> function.)
> Oops, secure memory pool already initialized
> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
> want Webferent signal
> . - ..
>
> I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but no -
> it recreated it but with same results.
>
> This error is stopping me checking or adding software.
>
> Can any one help me please ?

Install updates using "sudo urpmi --auto-update" and see if that fixes the
problem with mcc.

Report back if it doesn't.

Regards, Dave Hodgins.

[Vincent Coen]

Hello David!

Sunday September 18 2022 20:01, David W. Hodgins wrote to All:

> On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <***@gmail.com>
> wrote:

>> Hello All!
>>
>> For some months when ever I try and run MCC I get errors as in :
>>
>> . - ..
>> sudo mcc
>> Too late to run INIT block at
>> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
>> Ignore the following Glib::Object::Introspection & Gtk3 warnings
>> Subroutine Gtk3::main redefined at
>> /usr/share/perl5/vendor_perl/Gtk3.pm line 539. GLib-GObject-CRITICAL
>> **: g_boxed_type_register_static: assertion 'g_type_from_name (name)
>> == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
>> 'g_type_from_name (name) == 0' failed at
>> /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL **:
>> g_boxed_type_register_static: assertion 'g_type_from_name (name) ==
>> 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
>> 'g_type_from_name (name) == 0' failed at
>> /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
>> /usr/sbin/isodumper" since it is not installed [Writing ISO] at
>> /usr/libexec/drakconf line 833. Oops, secure memory pool already
>> initialized Oops, secure memory pool already initialized Overriding
>> existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you want
>> Webferent signal

> Up to this point, the messages are normal.

>> (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
>> 'WebKitWebPran X Window System error.
>> This probably reflects a bug in the program.
>> The error was 'BadValue (integer parameter out of range for
>> operation)'.
>> (Details: serial 199 error_code 2 request_code 154 (GLX)
>> minor_code 34)
>> (Note to programmers: normally, X errors are reported
>> asynchronously;
>> that is, you will receive the error a while after causing it.
>> To debug your program, run it with the GDK_SYNCHRONIZE
>> environment
>> variable to change this behavior. You can then get a meaningful
>> backtrace from your debugger if you break on the gdk_x_error()
>> function.)
>> Oops, secure memory pool already initialized
>> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if
>> you want Webferent signal . - ..
>>
>> I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but
>> no - it recreated it but with same results.
>>
>> This error is stopping me checking or adding software.
>>
>> Can any one help me please ?

> Install updates using "sudo urpmi --auto-update" and see if that fixes
> the problem with mcc.

> Report back if it doesn't.

Nope says packages are up to date followed by a long list of packages that
are now orphaned which I am ignoring as I did this a few years back and it
caused chaos !

What is the name of the mcc packages/s and the instruction to re-install
may be that will work :(



Vincent

[David W. Hodgins]

On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <***@gmail.com> wrote:

> Hello David!
>
> Sunday September 18 2022 20:01, David W. Hodgins wrote to All:
>
> > On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <***@gmail.com>
> > wrote:
>
> >> Hello All!
> >>
> >> For some months when ever I try and run MCC I get errors as in :
> >>
> >> . - ..
> >> sudo mcc
> >> Too late to run INIT block at
> >> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
> >> Ignore the following Glib::Object::Introspection & Gtk3 warnings
> >> Subroutine Gtk3::main redefined at
> >> /usr/share/perl5/vendor_perl/Gtk3.pm line 539. GLib-GObject-CRITICAL
> >> **: g_boxed_type_register_static: assertion 'g_type_from_name (name)
> >> == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> >> 'g_type_from_name (name) == 0' failed at
> >> /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL **:
> >> g_boxed_type_register_static: assertion 'g_type_from_name (name) ==
> >> 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> >> 'g_type_from_name (name) == 0' failed at
> >> /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
> >> /usr/sbin/isodumper" since it is not installed [Writing ISO] at
> >> /usr/libexec/drakconf line 833. Oops, secure memory pool already
> >> initialized Oops, secure memory pool already initialized Overriding
> >> existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you want
> >> Webferent signal
>
> > Up to this point, the messages are normal.
>
> >> (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
> >> 'WebKitWebPran X Window System error.
> >> This probably reflects a bug in the program.
> >> The error was 'BadValue (integer parameter out of range for
> >> operation)'.
> >> (Details: serial 199 error_code 2 request_code 154 (GLX)
> >> minor_code 34)
> >> (Note to programmers: normally, X errors are reported
> >> asynchronously;
> >> that is, you will receive the error a while after causing it.
> >> To debug your program, run it with the GDK_SYNCHRONIZE
> >> environment
> >> variable to change this behavior. You can then get a meaningful
> >> backtrace from your debugger if you break on the gdk_x_error()
> >> function.)
> >> Oops, secure memory pool already initialized
> >> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if
> >> you want Webferent signal . - ..
> >>
> >> I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but
> >> no - it recreated it but with same results.
> >>
> >> This error is stopping me checking or adding software.
> >>
> >> Can any one help me please ?
>
> > Install updates using "sudo urpmi --auto-update" and see if that fixes
> > the problem with mcc.
>
> > Report back if it doesn't.
>
> Nope says packages are up to date followed by a long list of packages that
> are now orphaned which I am ignoring as I did this a few years back and it
> caused chaos !
>
> What is the name of the mcc packages/s and the instruction to re-install
> may be that will work :(

$ rpm -q -f /usr/bin/mcc
drakconf-13.27-1.mga8

What version of the webkit2 package is installed (that's the one that's failing)?
I have ...
$ rpm -q webkit2
webkit2-2.36.7-1.mga8

Regards, Dave Hodgins

[Vincent Coen]

Hello David!

Monday September 19 2022 03:30, David W. Hodgins wrote to All:

> On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <***@gmail.com>
> wrote:

>> Hello David!
>>
>> Sunday September 18 2022 20:01, David W. Hodgins wrote to All:
>>
>> > On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen
>> <***@gmail.com>
>> > wrote:
>>
>> >> Hello All!
>> >>
>> >> For some months when ever I try and run MCC I get errors as in :
>> >>
>> >> . - ..
>> >> sudo mcc
>> >> Too late to run INIT block at
>> >> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line
>> 257.
>> >> Ignore the following Glib::Object::Introspection & Gtk3 warnings
>> >> Subroutine Gtk3::main redefined at
>> >> /usr/share/perl5/vendor_perl/Gtk3.pm line 539.
>> GLib-GObject-CRITICAL
>> >> **: g_boxed_type_register_static: assertion 'g_type_from_name
>> (name)
>> >> == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static:
>> assertion
>> >> 'g_type_from_name (name) == 0' failed at
>> >> /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL
>> **:
>> >> g_boxed_type_register_static: assertion 'g_type_from_name (name)
>> ==
>> >> 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static:
>> assertion
>> >> 'g_type_from_name (name) == 0' failed at
>> >> /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
>> >> /usr/sbin/isodumper" since it is not installed [Writing ISO] at
>> >> /usr/libexec/drakconf line 833. Oops, secure memory pool already
>> >> initialized Oops, secure memory pool already initialized
>> Overriding
>> >> existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
>> want
>> >> Webferent signal
>>
>> > Up to this point, the messages are normal.
>>
>> >> (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The
>> program
>> >> 'WebKitWebPran X Window System error.
>> >> This probably reflects a bug in the program.
>> >> The error was 'BadValue (integer parameter out of range for
>> >> operation)'.
>> >> (Details: serial 199 error_code 2 request_code 154 (GLX)
>> >> minor_code 34)
>> >> (Note to programmers: normally, X errors are reported
>> >> asynchronously;
>> >> that is, you will receive the error a while after causing it.
>> >> To debug your program, run it with the GDK_SYNCHRONIZE
>> >> environment
>> >> variable to change this behavior. You can then get a
>> meaningful
>> >> backtrace from your debugger if you break on the
>> gdk_x_error()
>> >> function.)
>> >> Oops, secure memory pool already initialized
>> >> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC
>> if
>> >> you want Webferent signal . - ..
>> >>
>> >> I moved /etc/mcc.cong to mcc.conf.save to see if thet would help
>> but
>> >> no - it recreated it but with same results.
>> >>
>> >> This error is stopping me checking or adding software.
>> >>
>> >> Can any one help me please ?
>>
>> > Install updates using "sudo urpmi --auto-update" and see if that
>> fixes
>> > the problem with mcc.
>>
>> > Report back if it doesn't.
>>
>> Nope says packages are up to date followed by a long list of
>> packages that are now orphaned which I am ignoring as I did this a
>> few years back and it caused chaos !
>>
>> What is the name of the mcc packages/s and the instruction to
>> re-install may be that will work :(

> $ rpm -q -f /usr/bin/mcc
> drakconf-13.27-1.mga8

> What version of the webkit2 package is installed (that's the one
> that's failing)? I have ... $ rpm -q webkit2 webkit2-2.36.7-1.mga8


Same for both what do I need to do to re-install them - yes, a bit of a
long shot :)



Vincent

[David W. Hodgins]

On Sun, 18 Sep 2022 22:30:13 -0400, David W. Hodgins <***@nomail.afraid.org> wrote:

> On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <***@gmail.com> wrote:
>
>> Hello David!
>>
>> Sunday September 18 2022 20:01, David W. Hodgins wrote to All:
>>
>> > On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <***@gmail.com>
>> > wrote:
>>
>> >> Hello All!
>> >>
>> >> For some months when ever I try and run MCC I get errors as in :
>> >>
>> >> . - ..
>> >> sudo mcc
>> >> Too late to run INIT block at
>> >> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
>> >> Ignore the following Glib::Object::Introspection & Gtk3 warnings
>> >> Subroutine Gtk3::main redefined at
>> >> /usr/share/perl5/vendor_perl/Gtk3.pm line 539. GLib-GObject-CRITICAL
>> >> **: g_boxed_type_register_static: assertion 'g_type_from_name (name)
>> >> == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
>> >> 'g_type_from_name (name) == 0' failed at
>> >> /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL **:
>> >> g_boxed_type_register_static: assertion 'g_type_from_name (name) ==
>> >> 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
>> >> 'g_type_from_name (name) == 0' failed at
>> >> /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
>> >> /usr/sbin/isodumper" since it is not installed [Writing ISO] at
>> >> /usr/libexec/drakconf line 833. Oops, secure memory pool already
>> >> initialized Oops, secure memory pool already initialized Overriding
>> >> existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you want
>> >> Webferent signal
>>
>> > Up to this point, the messages are normal.
>>
>> >> (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The program
>> >> 'WebKitWebPran X Window System error.
>> >> This probably reflects a bug in the program.
>> >> The error was 'BadValue (integer parameter out of range for
>> >> operation)'.
>> >> (Details: serial 199 error_code 2 request_code 154 (GLX)
>> >> minor_code 34)
>> >> (Note to programmers: normally, X errors are reported
>> >> asynchronously;
>> >> that is, you will receive the error a while after causing it.
>> >> To debug your program, run it with the GDK_SYNCHRONIZE
>> >> environment
>> >> variable to change this behavior. You can then get a meaningful
>> >> backtrace from your debugger if you break on the gdk_x_error()
>> >> function.)
>> >> Oops, secure memory pool already initialized
>> >> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if
>> >> you want Webferent signal . - ..
>> >>
>> >> I moved /etc/mcc.cong to mcc.conf.save to see if thet would help but
>> >> no - it recreated it but with same results.
>> >>
>> >> This error is stopping me checking or adding software.
>> >>
>> >> Can any one help me please ?
>>
>> > Install updates using "sudo urpmi --auto-update" and see if that fixes
>> > the problem with mcc.
>>
>> > Report back if it doesn't.
>>
>> Nope says packages are up to date followed by a long list of packages that
>> are now orphaned which I am ignoring as I did this a few years back and it
>> caused chaos !
>>
>> What is the name of the mcc packages/s and the instruction to re-install
>> may be that will work :(
>
> $ rpm -q -f /usr/bin/mcc
> drakconf-13.27-1.mga8
>
> What version of the webkit2 package is installed (that's the one that's failing)?
> I have ...
> $ rpm -q webkit2
> webkit2-2.36.7-1.mga8

The issue only affects some hardware/video drivers. My three systems have never
shown the problem.

There's a new webkit2 update currently in the core updates testing repo.
https://bugs.mageia.org/show_bug.cgi?id=30866

To install the testing version, as root install and run qarepo.
In qarepo set the mirror to the mageia directory on your preferred mirror, such
as "http://mirror.math.princeton.edu/pub/mageia".
Set the release to 8, and select the Core checkbox.
In the RPMS box copy and paste the following lines ...
lib64javascriptcoregtk4.0_18-2.36.8-1.mga8
lib64javascriptcore-gir4.0-2.36.8-1.mga8
lib64webkit2gtk4.0_37-2.36.8-1.mga8
lib64webkit2gtk-gir4.0-2.36.8-1.mga8
lib64webkit2-devel-2.36.8-1.mga8
webkit2-2.36.8-1.mga8
webkit2-jsc-2.36.8-1.mga8.x86_64.rpm

Select the Update button.

You should then be able to install the testing version of webkit2 using either
mgaapplet or using "urpmi --auto-select".

Regards, Dave Hodgins

[Vincent Coen]

Hello David!

Tuesday September 20 2022 17:23, David W. Hodgins wrote to All:

> On Sun, 18 Sep 2022 22:30:13 -0400, David W. Hodgins
> <***@nomail.afraid.org> wrote:

>> On Sun, 18 Sep 2022 19:44:20 -0400, Vincent Coen <***@gmail.com>
>> wrote:
>>
>>> Hello David!
>>>
>>> Sunday September 18 2022 20:01, David W. Hodgins wrote to All:
>>>
>>> > On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen
>>> <***@gmail.com>
>>> > wrote:
>>>
>>> >> Hello All!
>>> >>
>>> >> For some months when ever I try and run MCC I get errors as in
>>> :
>>> >>
>>> >> . - ..
>>> >> sudo mcc
>>> >> Too late to run INIT block at
>>> >> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line
>>> 257.
>>> >> Ignore the following Glib::Object::Introspection & Gtk3
>>> warnings
>>> >> Subroutine Gtk3::main redefined at
>>> >> /usr/share/perl5/vendor_perl/Gtk3.pm line 539.
>>> GLib-GObject-CRITICAL
>>> >> **: g_boxed_type_register_static: assertion 'g_type_from_name
>>> (name)
>>> >> == 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>>> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static:
>>> assertion
>>> >> 'g_type_from_name (name) == 0' failed at
>>> >> /usr/lib64/perl5/DynaLoader.pm line 210. GLib-GObject-CRITICAL
>>> **:
>>> >> g_boxed_type_register_static: assertion 'g_type_from_name
>>> (name) ==
>>> >> 0' failed at /usr/lib64/perl5/DynaLoader.pm line 210.
>>> >> GLib-GObject-CRITICAL **: g_boxed_type_register_static:
>>> assertion
>>> >> 'g_type_from_name (name) == 0' failed at
>>> >> /usr/lib64/perl5/DynaLoader.pm line 210. "cannot run
>>> >> /usr/sbin/isodumper" since it is not installed [Writing ISO] at
>>> >> /usr/libexec/drakconf line 833. Oops, secure memory pool
>>> already
>>> >> initialized Oops, secure memory pool already initialized
>>> Overriding
>>> >> existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
>>> want
>>> >> Webferent signal
>>>
>>> > Up to this point, the messages are normal.
>>>
>>> >> (WebKitWebProcess:2382156): Gdk-ERROR **: 19:22:23.961: The
>>> program
>>> >> 'WebKitWebPran X Window System error.
>>> >> This probably reflects a bug in the program.
>>> >> The error was 'BadValue (integer parameter out of range for
>>> >> operation)'.
>>> >> (Details: serial 199 error_code 2 request_code 154 (GLX)
>>> >> minor_code 34)
>>> >> (Note to programmers: normally, X errors are reported
>>> >> asynchronously;
>>> >> that is, you will receive the error a while after causing
>>> it.
>>> >> To debug your program, run it with the GDK_SYNCHRONIZE
>>> >> environment
>>> >> variable to change this behavior. You can then get a
>>> meaningful
>>> >> backtrace from your debugger if you break on the
>>> gdk_x_error()
>>> >> function.)
>>> >> Oops, secure memory pool already initialized
>>> >> Overriding existing handler for signal 10. Set
>>> JSC_SIGNAL_FOR_GC if
>>> >> you want Webferent signal . - ..
>>> >>
>>> >> I moved /etc/mcc.cong to mcc.conf.save to see if thet would
>>> help but
>>> >> no - it recreated it but with same results.
>>> >>
>>> >> This error is stopping me checking or adding software.
>>> >>
>>> >> Can any one help me please ?
>>>
>>> > Install updates using "sudo urpmi --auto-update" and see if that
>>> fixes
>>> > the problem with mcc.
>>>
>>> > Report back if it doesn't.
>>>
>>> Nope says packages are up to date followed by a long list of
>>> packages that are now orphaned which I am ignoring as I did this a
>>> few years back and it caused chaos !
>>>
>>> What is the name of the mcc packages/s and the instruction to
>>> re-install may be that will work :(
>>
>> $ rpm -q -f /usr/bin/mcc
>> drakconf-13.27-1.mga8
>>
>> What version of the webkit2 package is installed (that's the one
>> that's failing)? I have ... $ rpm -q webkit2 webkit2-2.36.7-1.mga8

> The issue only affects some hardware/video drivers. My three systems
> have never shown the problem.

> There's a new webkit2 update currently in the core updates testing
> repo.
> https://bugs.mageia.org/show_bug.cgi?id=30866

> To install the testing version, as root install and run qarepo.
> In qarepo set the mirror to the mageia directory on your preferred
> mirror, such as "http://mirror.math.princeton.edu/pub/mageia". Set the
> release to 8, and select the Core checkbox. In the RPMS box copy and
> paste the following lines
> ... lib64javascriptcoregtk4.0_18-2.36.8-1.mga8 lib64javascriptcore-gir
> 4.0-2.36.8-1.mga8 lib64webkit2gtk4.0_37-2.36.8-1.mga8 lib64webkit2gtk-
> gir4.0-2.36.8-1.mga8 lib64webkit2-devel-2.36.8-1.mga8 webkit2-2.36.8-1
> .mga8 webkit2-jsc-2.36.8-1.mga8.x86_64.rpm

> Select the Update button.

> You should then be able to install the testing version of webkit2
> using either mgaapplet or using "urpmi --auto-select".

> Regards, Dave Hodgins

OK, done the above and used urpmi then ran mcc and get :

-bash-5.1$ mcc

Too late to run INIT block at
/usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.



(mcc:2663876): dbind-WARNING **: 14:59:51.319: Couldn't register with
accessibility bus: Did not receive a reply. Possible causes include: the
remote application did not send a reply, the message bus security policy
blocked the reply, the reply timeout expired, or the network connection was
broken.
Ignore the following Glib::Object::Introspection & Gtk3 warnings
Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
line 539.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
line 210.
"cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at
/usr/libexec/drakconf line 833.
Oops, secure memory pool already initialized
Oops, secure memory pool already initialized
Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
want WebKit to use a different signal

(WebKitWebProcess:2663934): Gdk-ERROR **: 15:00:03.186: The program
'WebKitWebProcess' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadValue (integer parameter out of range for operation)'.
(Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the GDK_SYNCHRONIZE environment
variable to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error()
function.)

Needless to say I cannot access any mcc menu item.


Vincent

[William Unruh]

On 2022-09-21, Vincent Coen <***@gmail.com> wrote:
>
(removed old replies and suggestion to try mcc from testing)
> OK, done the above and used urpmi then ran mcc and get :
>
> -bash-5.1$ mcc
>
> Too late to run INIT block at
> /usr/lib64/perl5/vendor_perl/Glib/Object/Introspection.pm line 257.
>
>
>
> (mcc:2663876): dbind-WARNING **: 14:59:51.319: Couldn't register with
> accessibility bus: Did not receive a reply. Possible causes include: the
> remote application did not send a reply, the message bus security policy
> blocked the reply, the reply timeout expired, or the network connection was
> broken.
> Ignore the following Glib::Object::Introspection & Gtk3 warnings
> Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
> line 539.

That error message I find most strange. What accessibility bus? What
remote application? Why is mcc trying to connect with a remote (not on
your system I presume) application. It sounds like your system is set up
differently that most. Do you have accessibility stuff on your system?


> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> GLib-GObject-CRITICAL **: g_boxed_type_register_static: assertion
> 'g_type_from_name (name) == 0' failed at /usr/lib64/perl5/DynaLoader.pm
> line 210.
> "cannot run /usr/sbin/isodumper" since it is not installed [Writing ISO] at
> /usr/libexec/drakconf line 833.
> Oops, secure memory pool already initialized
> Oops, secure memory pool already initialized
> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
> want WebKit to use a different signal

I do not understand these reference to WebKit.
What is it? Why is it running? Can you try getting rid of it, and seeing
if that helps? (It seems to be an Apple browser engine. Why MCC would be
using it I do not know but it seems to be messing it up, maybe)


>
> (WebKitWebProcess:2663934): Gdk-ERROR **: 15:00:03.186: The program
> 'WebKitWebProcess' received an X Window System error.
> This probably reflects a bug in the program.
> The error was 'BadValue (integer parameter out of range for operation)'.
> (Details: serial 199 error_code 2 request_code 154 (GLX) minor_code 34)
> (Note to programmers: normally, X errors are reported asynchronously;
> that is, you will receive the error a while after causing it.
> To debug your program, run it with the GDK_SYNCHRONIZE environment
> variable to change this behavior. You can then get a meaningful
> backtrace from your debugger if you break on the gdk_x_error()
> function.)
>
> Needless to say I cannot access any mcc menu item.
>
>
> Vincent
>
>

[David W. Hodgins]

On Wed, 21 Sep 2022 18:28:48 -0400, William Unruh <***@invalid.ca> wrote:
> On 2022-09-21, Vincent Coen <***@gmail.com> wrote:
>> -bash-5.1$ mcc
>> (mcc:2663876): dbind-WARNING **: 14:59:51.319: Couldn't register with
>> accessibility bus: Did not receive a reply. Possible causes include: the
>> remote application did not send a reply, the message bus security policy
>> blocked the reply, the reply timeout expired, or the network connection was
>> broken.
>> Ignore the following Glib::Object::Introspection & Gtk3 warnings
>> Subroutine Gtk3::main redefined at /usr/share/perl5/vendor_perl/Gtk3.pm
>> line 539.

> That error message I find most strange. What accessibility bus? What
> remote application? Why is mcc trying to connect with a remote (not on
> your system I presume) application. It sounds like your system is set up
> differently that most. Do you have accessibility stuff on your system?

The dbind-warning is from dbus. It's only used for communications between
applications on the same system. The term remote in this case does not been
over a network, it's just the way dbus handles messages.

>> Overriding existing handler for signal 10. Set JSC_SIGNAL_FOR_GC if you
>> want WebKit to use a different signal
>
> I do not understand these reference to WebKit.
> What is it? Why is it running? Can you try getting rid of it, and seeing
> if that helps? (It seems to be an Apple browser engine. Why MCC would be
> using it I do not know but it seems to be messing it up, maybe)

The webkit utility is created by Apple.

Mageia's webkit2 package description "WebKitGTK is the port of the portable
web rendering engine WebKit to the GTK platform".

Vincent, is your system using wayland?

Regards, Dave Hodgins

[Vincent Coen]

Hello David!

Thursday September 22 2022 01:10, David W. Hodgins wrote to All:


> Vincent, is your system using wayland?

> Regards, Dave Hodgins


Looking at o/p from rpmlist.sh I see :

egl-wayland-json
kwayland
kwayland-server
lib64gstwayland1.0_0
lib64kf5wayland5
lib64kwaylandserver5
lib64nvidia-egl-wayland1
lib64qt5waylandclient5
lib64wayland-client0
lib64wayland-cursor0
lib64wayland-devel
lib64wayland-egl1
lib64wayland-server0
wayland-protocols-devel
wayland-tools
x11-server-xwayland

Looks like it is, is this the problem and if so how do I remove them -
assuming it does not break any thing ?


Vincent

[David W. Hodgins]

On Thu, 22 Sep 2022 09:25:41 -0400, Vincent Coen <***@gmail.com> wrote:
> Thursday September 22 2022 01:10, David W. Hodgins wrote to All:
> > Vincent, is your system using wayland?

> Looks like it is, is this the problem and if so how do I remove them -
> assuming it does not break any thing ?

It's not necessary to remove them. Just log out, then at the login screen,
before you enter the password, click on where it says "Plasma Wayland",
and select "Plasma" (or "Plasma on Xorg" depending on the login manager),
then enter the password and login.

Regards, Dave Hodgins

[Vincent Coen]

Hello David!

Thursday September 22 2022 17:21, David W. Hodgins wrote to All:

> On Thu, 22 Sep 2022 09:25:41 -0400, Vincent Coen <***@gmail.com>
> wrote:
>> Thursday September 22 2022 01:10, David W. Hodgins wrote to All:
>> > Vincent, is your system using wayland?

>> Looks like it is, is this the problem and if so how do I remove them
>> - assuming it does not break any thing ?

> It's not necessary to remove them. Just log out, then at the login
> screen, before you enter the password, click on where it says "Plasma
> Wayland", and select "Plasma" (or "Plasma on Xorg" depending on the
> login manager), then enter the password and login.

Will try that - its possible due for a reboot as uptime is 40 days - which
for me is very short :)





Vincent

[Vincent Coen]

Hello David!

Thursday September 22 2022 17:21, David W. Hodgins wrote to All:

> On Thu, 22 Sep 2022 09:25:41 -0400, Vincent Coen <***@gmail.com>
> wrote:
>> Thursday September 22 2022 01:10, David W. Hodgins wrote to All:
>> > Vincent, is your system using wayland?

>> Looks like it is, is this the problem and if so how do I remove them
>> - assuming it does not break any thing ?

> It's not necessary to remove them. Just log out, then at the login
> screen, before you enter the password, click on where it says "Plasma
> Wayland", and select "Plasma" (or "Plasma on Xorg" depending on the
> login manager), then enter the password and login.

I have plasma but not Wayland plasma or not and have booted to it loaded
mcc at it now operates - at least offering the correct menu options.

Thanks,




Vincent

[David W. Hodgins]

On Sun, 18 Sep 2022 14:28:26 -0400, Vincent Coen <***@gmail.com> wrote:

> (WebKitWebProcess:2382156): Gdk-ERROR